 |
 |
|
 |
|
| Here you'll find out how to delete audio recordings and replace them with new ones. Based on Re-recording, which is also explained in the EXILIM Tips & Tricks. |
|
|
 |
 |
In the PLAY mode, use  and  to scroll through snapshots until the one whose audio you want to re-record is displayed. |
|
|
|
 |
Select the "PLAY" tab, select "Dubbing", and then press . |
|
|
|
|
 |
Use  and  to select "Delete", and then press [SET]. |
|
|
|
|
 |
Press the shutter button to start audio recording. |
|
|
|
|
 |
Recording stops after about 30 seconds or when you press the shutter button.
• This deletes the previous recording and replaces it with a new one. |
|
|
|
|
 |
|
|
| • |
Keep the microphone on the front of the camera pointed at the subject. |
|
| • |
Take care that you do not block the microphone with your fingers. |
|
 |
|
|
| • |
Good recording results are not possible when the camera is too far from the subject. |
|
| • |
Operating camera buttons during recording can cause button noise to be included in the audio. |
|
| • |
The  -Icon icon appears on the monitor screen after audio recording is complete. |
|
| • |
You will not be able to record audio when remaining memory capacity is low. |
|
| • |
The following types of audio recording are not supported.
• Adding audio to a movie image
• Adding audio to a protected snapshot |
|
| • |
Audio that is re-recorded or deleted cannot be recovered. Make sure you no longer need audio before re-recording or deleting it. |
|
|
|
|
 |
|
|
EXILIM models with audio recording: EX-P505, EX-P700, EX-P600, EX-Z55, EX-Z50, EX-Z40,
EX-Z30, EX-Z4, EX-Z3, EX-S100 and EX-S500 |
|
|
|
|
